Made from the same material as our International bars but with one big benefit, reduced shipping cost! When properly assembled this bar meets NFHS and NCAA rules but can be shipped overnight if needed. Finally a crossbar that can be shipped as efficiently as a small package!

CROSSBARS ARE NOT GUARANTEED AGAINST BREAKAGE.

MODEL SHIPPED MAY VARY, SEE IMAGE FOR NEW MODEL PHOTO.

Effectively discourages joggers and recreational runners from using the three inside lanes and causing premature and uneven wear. Locks into place. Lift and rotate to allow training on inside lanes. Includes ground sleeve.  Colors available by calling for info 800-676-7463

Truck freight only

Made of the same stretchable neoprene as our PowerMax Weight Vest these ankle weights can be adjusted to fit anyone.  5lb weights,
Sold in Pairs

Depressed: Cast aluminum designed for a depressed pad. Compatible with 366, 369, and 374 shot circles, and 3741 form. Meets NCAA and NFHS specifications.

Level: Cast aluminum designed for a level pad. Compatible with 372 and 373 shot circles. Meets NFHS specifications.

Developed by legendary sprinting coach Willie Williams. Ankle-Flex Straps hold the sprinters foot in the flexed position for improved ground strike efficiency and lower leg swing resistance. Sold in pairs.

The secret to more jumps in practice lies within the Gill Jump Box. The Arched Jump Box is a convex jumping box made of lightweight steel that is easy to carry to and from practices. It is covered in synthetic track material so your athletes have the same feeling as the runway or high jump apron. The Arched Jump Box is 8" high in the middle by 30" wide by 47" long.

Shipping $400, we will refund any amount over actual.

Gives hands a dry firm grip on shot or discus

Rope Hoist-An important option for all gyms equipped with climbing ropes. This hoist is complete with wall brackets, ceiling attachment, heavy-duty cord and weight. Installs with ease and is ready to use.

Tambourine-Constructed of 3/8” double lacquered plywood, this tambourine restricts climbing height and acts as an indicator for exercise completion. Special clamp permits fast removal and allows easy adjustment.

Safety Guard-An important safety option for all climbing ropes. This safety guard prevents the rope from falling to the floor if a part fails or wears out.

Rope Clamp for 3 1/2" OD Pipe (PULLEY EYE CLAMP 3 1/2") - ALLOW 10 DAYS PROCESSING TIME

Steel “I” Beam Clamp-A convenient way to mount climbing ropes to the bottom flange of standard roof framing trusses. A 3/4” diameter threaded clamp assembly and ductile iron eye casting clamp provides a simple, heavy-duty attachment system.

A safe economical choice for all your jumping events, the Compact Wind Indicator unintrusively tells the athlete the relative strength of the wind at the point of use. Help your athletes stay safe and jump farther and higher with this aesthetic wind indicator.

Six digit race clocks with 9” tall digits. Countup/count-down capability in seconds or hundredths of seconds. Powered by 120V AC or external 12V battery. Tripod and small remote control included with all race clocks (end-mounted controls for direct operation). Optional carrying case available.

Note: This clock will not interface with timing systems.

E39862, E39864 Instructions (133.58 kB)

CA Prop 65 Warning

This LJ/TJ Sand Pit Cover is fabricated from extruded aluminum seat plank. The ideal cosmetic cover for your LJ/TJ sand pits. Three planks per panel are securely welded together in a frame of 2-3/8" x 1-1/2" x 3/16" aluminum angle. Each panel comes with four retractable handles for easy installation and removal.

A 2" wide supporting recess is required on each side wall for the panels. This recess is not required on the end walls. When not using a Gill pre-fabricated sand pit form, it is important to include a 2" "ledge" along the sides of the sand pit to accommodate the 730148 sand pit cover. The 730148 is designed to allow a track builder to apply the same surface as on the track for a seamless design. Manufacturing begins upon receipt of form 730148-2 (field check guide). A typical sand pit requires 10-11 cover panels.

Sold by the square foot. - PLEASE CALL TO ORDER 800-676-7463

730148 Instructions

(526.95 kB)

730148 CSI Spec

(28.37 kB)
730148 Dimensions Certification

(298.79 kB)

100% cast aluminum with a wall thickness of 3/8" and a powder coat finish. Inside corners rounded for unhindered pole rotation. Guaranteed against cracking or warping.  Meets High School and NCAA specifications.  WA certified.

Cross Country KIt: Includes: 24 chute posts, 2-110’ lengths of chute rope with pennants, 9 directional flags (3 red, 3 blue, 3 yellow) and 9 flag poles.

961 4’ Chute Post

9650 Flag Pole, Red Flag (Left Turn)
9660 Flag Pole, Blue Flag (Straight)
9670 Flag Pole, Yellow Flag (Right Turn)

96501 Replacement Red Flag (Left Turn)
96601 Replacement Blue Flag (Straight)
96701 Replacement Yellow Flag (Right Turn)

• Customize for your school's personality
• Holds up to five vaulting poles
• Shoulder strap for ease of transportation
• Heavy duty vinyl and leather reinforced ends for long life
• Made to fit 6" corrugated drain tube (not included)
• Available in 10, 11, 12, 13, 14,15, 16, 17 and 18 foot lengths. - SPECIFY LENGTH IN THE ORDER COMMENTS ON CHECKOUT PAGE
• Allow 2 week lead time for production.
• CA Prop 65 Warning

All sizes are same price. Use the graphic worksheet or specify a solid color. Email art to doug at vsathletics.com

Custom Pole Bag Graphic Worksheet

Deluxe Universal Implement Carrier that can hold any of the three standard throwing implements; shot put (1), discus (2), or hammer (1). No need to buy individual expensive elite carriers that aren’t as well-rounded as you! Get more bang for your buck today with a Deluxe Universal Implement Carrier.

Steel cart with black powder coat finish. Holds 44 implements

• Holds up to five vaulting poles
• Heavy duty vinyl and leather reinforced ends for long life
• Adjustable from 14'6" to 17'6"
• Made to fit 6" corrugated drain tube (not included)

For schools that value safety, the Gill Athletics HALO® Starting Device's intentional patent pending ring design reduces the concern of guns at the track. Unlike traditional starting pistols that require costly firearm cartridges, the HALO® device is an electronic system that can connect wirelessly to the Wireless Starter System and produce both the traditional bang sound and an audible tone. Connect to the Multiple Speaker System to disperse sound above the decibel standard equally across the starting line.

• Unique ring design reduces the concern of guns on school campuses
• 12 total LED lights that wrap around both sides of the device so that the hand-timers can see the flash clearly from afar
• Sounds either a tone or bang sound when used with the Wireless Starter System. Tested to meet the >90db requirement to start a track meet when used with this speaker system
• Features an audio jack for compatibility with existing speaker systems that have an aux input. However, please note that if used with another speaker system, it is not guaranteed to meet the >90db requirement
• Batteries are a less expensive solution compared to blanks
• Wireless option available to eliminate cable cord stretching around the track to the official
• Compatible with FinishLynx® and Eagle Eye timing systems
• Powered by one 9V battery, included
• Includes: Halo Device, Protective Soft Carrying Case, Audio Cable, Timing System Cable, 9V Battery, Phillips Head Screwdriver

E49710 Instructions

(396.14 kB)

CA Prop 65 Warning

Designed for use with rocker or “L” shaped hurdles. Walk in design easily holds 10 hurdles. Powder coated, all steel construction with swivel casters for easy handling. Fits all Gill 41" hurdles. 35" Model selection also available in drop-down list.

CA Prop 65 Warning

Quickly and easily measure the weight of any track implement. Works for javelin, discus, hammer and shot. Easy zero reset prior to weighing. Read out in English or Metric system.

CHOOSE FROM 3 DIFFERENT VERSIONS - ALL SOLD SEPARATE

CA Prop 65 Warning

Technique and arm speed training balls. For indoor use. 

Choose size in selection list for price.

CA Prop 65 Warning

Heavy gauge aluminum design features a fluted dome-shaped top. Each section of curbing is notched at one end to allow easy drop in or removal of section. The curbing is supported by 1/2" tall ribbed feet for rapid drainage. Optional pin kit available to help keep the curbing from shifting on the track. Permanent installation curbing includes two anchor pins for every 20' section. (Installer to supply epoxy to anchor pins in place.) Meets NCAA specifications. WA certified.

Sold by the linear foot.  (If you need 400m, 400m = 1312.34 ft, order 1313)

Anodized curbing available in silver or gold. Powder coating available in 15 colors. Specify color at time of order.

Freight shown will be refunded down to actual after delivery.

How to Measure Your Track For Curbing

	851P Instructions
	Dimension Certification Form
	Gill Color Guide
	Permanent Track Curbing Specifications and Instruc
	Track Curbing Specifications and Instructions

Heavy winds can wreak havoc on your HJ and PV landing systems. Once high winds pick up your pit, damage is only seconds away! Placing heavy objects or hurdles on a pit are not effective and only increase the likelihood of damage. Now there is a solution. Using the Landing System Tie-Down Kit will decrease the chance of your pit ’flying’ away. Sold in one strap increments, you choose the best solution for your facility. Sold as a concrete installation as well as ’earth’ (grass) installation choices, you now have a viable and inexpensive option to help save your investment.

CA Prop 65 Warning

Call us for individual markers only. 800-676-7463 - Shipping is set for a complete set so it will be high.

Custom Lane Marker Worksheet

• Steel construction with welded support braces
• Synthetic track material on jump surface
• track spikes can be installed to ensure no slipping if needed

Redesigned Offset Extensions easily lower your Gill 7110, 7130, and 7141 and any PV Standard with 1.25” square offsets another 2 feet! Powder coated in safety orange and sold as a pair.

Free standing pole rack made of heavy-duty steel with powder coat finish. The convenient way to store and protect your poles during meets and practice.

Truck freight only.

In the past, these types of runway systems have been priced upwards to 75k! You can now have this product at a fraction of that price. The new Gill Raised Runway allows for the flexibility to design runways that will accommodate the pole vault, long jump and triple jump for all levels of competition and practice.

The basic unit is an 8’ x 4’ general runway section. Specialized sections incorporate a vault box or take-off boards(s). The construction of each section is welded aluminum, with 1/2” plywood decking. Track surfacing is not included, so you can have your preference on surfacing.

Adjunct products for the raised runway include the Soft Shell Sand Pit Form for the long and triple jump (sand not included), and a pole vault pit elevating system.

Base Runway Section - RR100
The main portion of your overall raised runway will be the Base Runway Sections. These sections run from the event section (LJ,TJ or PV) back to the end of the runway. Each section is designed to be strapped together for a firm fit; as well as have leveling feet clearance for forklifts for end of the year storage. Custom colors available! Track surface not included.

LJ/TJ Runway Section - RR350
Designed for long jump and/or triple jump competition. This section gives you the flexibility to set your take-off boards where you want them in your raised runway system. Blanking lid and tray included. Take-off boards sold separately. Track surface not included.

Long Jump Runway Section for Use with Soft Shell Sand Pit Form - RR300
Same dimensions as the RR100 Base Runway with a slant in the front to match the slope of the Soft Shell Sand Pit Form. While this section can be used with your existing above ground sand pit form, it is built specifically with the Soft Shell Sand Pit Form in mind. Blanking lid and tray included. Take-off boards sold separately. Track surface not included.

Soft Shell Sand Pit Form - RR400
Now a high level functioning sand pit form for your LJ/TJ raised runway section. Lightweight outer shell holds sand during practice or competition. Custom colors available!

Vault Box Runway Section - RR200
Same dimensions as the RR100 Base Runway Section and includes a 502 Aluminum Vault Box. Track surface not included.

Pole Vault Pit Risers - RR500
When a raised runway system is used, the pole vault pit needs to be raised to the same height. These lightweight durable pit risers match your current pole vault pit to the height of the Gill Raised Runway system. Multiple configurations available to fit your specific sized pit.

Made to specification in 6 weeks