Facilities/Complex

Effectively discourages joggers and recreational runners from using the three inside lanes and causing premature and uneven wear. Locks into place. Lift and rotate to allow training on inside lanes. Includes ground sleeve.  Colors available by calling for info 800-676-7463

Truck freight only

When wind is not your friend, choose the new Brutus Discus Cages from Gill Athletics. Made with a beefy super strong 4" aluminum pole, these cages will decrease the possibility of wind becoming a negative factor on your throwing cage. 6 pole, 7 pole, and rear door options are available for high school cages.

CAGE POLES Available in traditional 6 pole or 7 pole configuration. 7 pole design allows the net to extend straight forward from the sides to comply with the 34.92 degrees sector requirements while providing a less ?restrictive" feeling for throwers.All poles are 14' tall with a 4" outside diameter.

MAIN NETS High school discus cage nets are made of a nylon 6 material with a 180 lb break strength. All nets are UV stabilized to help increase their life span. Net height for all high school cages is 13'6".

BARRIER NETS Barrier nets are 8' tall and install on the outside of the net poles. This gives an additional layer of protection to athletes, fans, officials, and coaches from errant throws.

CALL FOR PRICING ON 7 Pole NCAA w rear door

	9010 Instructions and Specifications
	9020 Instructions and Specifications
	9021 Instructions and Specifications

Same quality construction as Discus Cage. Includes  a weather treated 43′ x 14′ Net which attaches with  carabineers and spring clips for quick removal.  Curved Aluminum Posts. 2.85″ O.D. Meets all HS  Federation rules.

5-year warranty on poles.

FREIGHT ONLY
SHIPPING WEIGHT 275lbs / PR. 2-Bundles + 2 Boxes

When wind is not your friend, choose the new Brutus Discus Cages from Gill Athletics. Made with a beefy super strong 4" aluminum pole, these cages will decrease the possibility of wind becoming a negative factor on your throwing cage. 6 pole, 7 pole, and rear door options are available for high school cages.

CAGE POLES Available in traditional 6 pole or 7 pole configuration. 7 pole design allows the net to extend straight forward from the sides to comply with the 34.92 degrees sector requirements while providing a less ?restrictive" feeling for throwers.All poles are 14' tall with a 4" outside diameter.

MAIN NETS High school discus cage nets are made of a nylon 6 material with a 180 lb break strength. All nets are UV stabilized to help increase their life span. Net height for all high school cages is 13'6".

BARRIER NETS Barrier nets are 8' tall and install on the outside of the net poles. This gives an additional layer of protection to athletes, fans, officials, and coaches from errant throws.

CUSTOM PAINT COLORS AVAILABLE FOR AN ADDITIONAL FEE - CALL TO ORDER

YOU WILL BE CONTACTED REGARDING A FREIGHT QUOTE AFTER ORDERING.

CA Prop 65 Warning

	9010 Instructions and Specifications
	9020 Instructions and Specifications
	9021 Instructions and Specifications

Cage is NFHS compliant and designed to the 34.92 degrees throwing sector configuration. Cage includes main net and ground sleeves.

CAGE POLES Net poles are A513 steel that are powder coated for extra rust resistance. Poles are 14' tall with a rolled offset for safety.

MAIN NET High school discus cage nets are made of a nylon 6 material with a 180 lb break strength. All nets are UV stabilized to help increase life span. Net height for all high school cages is 13'6".

BARRIER NETS Barrier nets are 8' tall and install on the outside of the net poles. This gives an additional layer of protection to athletes, fans, officials, and coaches from errant throws.

CA Prop 65 Warning

8030 Specifications and Instructions

Allow 4 weeks for replacement nets
WE WILL CONTACT YOU ABOUT FREIGHT CHARGES AFTER ORDERING.

Call us about adding color framing options. 800-676-7463

Heavy gauge aluminum design features a fluted dome-shaped top. Each section of curbing is notched at one end to allow easy drop in or removal of section. The curbing is supported by 1/2" tall ribbed feet for rapid drainage. Optional pin kit available to help keep the curbing from shifting on the track. Permanent installation curbing includes two anchor pins for every 20' section. (Installer to supply epoxy to anchor pins in place.) Meets NCAA specifications. WA certified.

Sold by the linear foot.  (If you need 400m, 400m = 1312.34 ft, order 1313)

Anodized curbing available in silver or gold. Powder coating available in 15 colors. Specify color at time of order.

Freight shown will be refunded down to actual after delivery.

How to Measure Your Track For Curbing

	851P Instructions
	Dimension Certification Form
	Gill Color Guide
	Permanent Track Curbing Specifications and Instruc
	Track Curbing Specifications and Instructions

In the past, these types of runway systems have been priced upwards to 75k! You can now have this product at a fraction of that price. The new Gill Raised Runway allows for the flexibility to design runways that will accommodate the pole vault, long jump and triple jump for all levels of competition and practice.

The basic unit is an 8’ x 4’ general runway section. Specialized sections incorporate a vault box or take-off boards(s). The construction of each section is welded aluminum, with 1/2” plywood decking. Track surfacing is not included, so you can have your preference on surfacing.

Adjunct products for the raised runway include the Soft Shell Sand Pit Form for the long and triple jump (sand not included), and a pole vault pit elevating system.

Base Runway Section - RR100
The main portion of your overall raised runway will be the Base Runway Sections. These sections run from the event section (LJ,TJ or PV) back to the end of the runway. Each section is designed to be strapped together for a firm fit; as well as have leveling feet clearance for forklifts for end of the year storage. Custom colors available! Track surface not included.

LJ/TJ Runway Section - RR350
Designed for long jump and/or triple jump competition. This section gives you the flexibility to set your take-off boards where you want them in your raised runway system. Blanking lid and tray included. Take-off boards sold separately. Track surface not included.

Long Jump Runway Section for Use with Soft Shell Sand Pit Form - RR300
Same dimensions as the RR100 Base Runway with a slant in the front to match the slope of the Soft Shell Sand Pit Form. While this section can be used with your existing above ground sand pit form, it is built specifically with the Soft Shell Sand Pit Form in mind. Blanking lid and tray included. Take-off boards sold separately. Track surface not included.

Soft Shell Sand Pit Form - RR400
Now a high level functioning sand pit form for your LJ/TJ raised runway section. Lightweight outer shell holds sand during practice or competition. Custom colors available!

Vault Box Runway Section - RR200
Same dimensions as the RR100 Base Runway Section and includes a 502 Aluminum Vault Box. Track surface not included.

Pole Vault Pit Risers - RR500
When a raised runway system is used, the pole vault pit needs to be raised to the same height. These lightweight durable pit risers match your current pole vault pit to the height of the Gill Raised Runway system. Multiple configurations available to fit your specific sized pit.

Made to specification in 6 weeks

Photo shows optional rear access option installed. Call for custom colored poles quote.

Poles: (8) 6063-T6 aluminum net poles
• Net: Weather treated nylon 6 net with 340 lb break strength
• Rear door access net standard
• Net height: 16’ 7”
• Rear net support tubes prevent net sag
• 18” hinged net arms secure net at all eight poles
• 36” deep ground sleeves
• Meets NCAA specifications

732130 Specifications and Instructions

732150 Instructions and Specifications

SHIPPING CHARGES WILL BE REDUCED TO ACTUAL IF NECESSARY AFER PROCESSING.

Portable Cage:

Designed for set up and removal as needed
• Poles: (8) 2 1⁄2” outside diameter schedule 40 aluminum net poles
• Net: Weather treated nylon 6 net with 340 lb break strength
• Net height: 16’ 7”
• Bases: A500 Grade B steel with wheels for transportability and weighted with
5 gallon jugs to be filled with sand or water
• Meets NCAA specifications

CA Prop 65 Warning

• Poles: (9) 6063-T6 raw aluminum net poles
• Net: Weather treated nylon 6 net with 340lb break strength
• Rear door access net standard
• Net height: 6m
• Rear net support tubes prevent net sag
• 18" hinged net arms secure net at all nine poles
• 36" deep ground sleeves
• Meets NCAA and World Athletics Specifications
• 5 year warranty. 1 year warranty on nets
• CA Prop 65 Warning

Lead Time: 15 Days

You will be contacted regarding an exact freight quote after ordering or call us.